Tegometall Shelf Configurator

Color

(longlife and durable Coatings)

We have original Tegometall shelves available in large quantities in stock and ready to ship. The most popular colors are jurassic-white, light-gray, white-aluminum and anthracite-gray.

The color representation shows only the hue and not the surface texture and may differ slightly depending on the monitor setting and device you are using. Therefore, we always specify the RAL color code.

We also have countless colors and spot colors to choose from in the program. Almost everything is possible, from RAL colors of all kinds to certain wood patterns or stone decor. We are glad to advise you in person.

Complete Shelf or Add-On Shelf

The complete shelf is freestanding and therefore includes two uprights with corresponding baselegs. Different shelf heights are selectable. From a shelf height of 220cm, the uprights should be secured with a wall mounting. These are automatically included with configured shelves.

Add-on shelf elements can be easily attached to the complete shelf and require only one upright incl. baseleg.

For Example:
a) You need 1 meter shelf freestanding: Here you have to choose a complete shelf with 100 cm axial dimension.
b) You need 4 meters shelf free-standing: Here you have to choose 1 complete shelf and 3 add-on shelves, each with a 100 cm axial dimension.
c) You have already installed Tegometall shelves and you just want to supplement them: No problem, because our shelves are original Tegometall and fully compatible. Correspondingly, you can select our add-on shelves for additions to your already existing shelf.

Extra Shelf

(Shelf boards, -levels)

In addition to the Baselevel, you can add more shelf boards to your Tegometall shelf. For each shelf you will receive a matching console pair.

Shelves can be flexibly suspended at different heights and can be tilted by appropriate brackets (except for shelf depth of 67 cm).

The shelves can not be deeper than the baseleg. It is recommended that at higher loads, additional shelves be at least 10cm smaller than the baseleg for optimum stability.

Depending on the axial dimension, depth and the consoles used, different capacity loads must be taken into account. Details can be found in our << Tegometall Assembly Guide >>.

For special load requirements, please contact our sales team. We are happy to advise you.